Nowadays, stainless steel is used in many industries and applicants. Popular uses include architectural design, marine equipment, oil/gas pipelines, and vehicle components, to name a few.
Stainless steel piston rods are a subcategory of that only, Which includes a range of shapes and sizes, including round, flat, square, and hexagonal bars. Here we will help you acknowledge more about Stainless steel piston rods’ definition, quality, characteristics, and uses.
Definition of Stainless Steel Piston Rod:
Piston rod stock is nearly as diverse as steel industry output, but some types are more frequent than others.
To reinforce the rod inventory, other ways are applied. According to Hart, most big diameter piston rods are induction hardened, which improves impact resistance. If an end-user keeps breaking male rod threads, this stronger alloy can assist extend the life of the cylinder.
By far the most popular bar stock material is 75 kpsi 0.0005-in. “There are also many more alternatives. The tensile strength of a steel piston rod can be enhanced to 100 kpsi, and chrome can be raised to 0.001 percent.
Stainless Steel Piston Rod Uses:
Stainless Steel Bars are bifurcated in either hot rolled or cold drawn. The surface of hot-rolled bars is rougher than that of drawn bars. These bars are used only for their strength and corrosion resistance properties.
Stainless steel piston rod bars are operated in adorning applications and outdoor fixtures. Because of their flat surface, cold-drawn bars are chosen. A stainless steel piston bar, which is a variety of stainless steel round bars, is one such cold-drawn bar. The radius ranges from 6mm to 100mm in stainless steel piston high-quality bars.
Stainless steel piston rod bars are available in two varies; Hot rolled or cold-drawn stainless steel bars. The surface of hot-rolled bars is rougher than that of drawn bars.
These bars are exclusively utilized because of their strength and resistance to corrosion. Cold drawn bars, on the other hand, are operated in aesthetic applications and outdoor fixtures.
Because of their flat surface, cold-drawn bars are chosen. One type of cold-drawn bar is a stainless steel piston bar, which is a variant of stainless steel round bars. The radius ranges from 6mm to 100mm in stainless steel piston high-quality bars.
Stainless steel rods are a common structure and finishing material. They’re used in a wide range of industries and applications. Stainless steel piston rod quality bars are used in cylinder shafts, hydraulic piston shafts, pump shafts, bearing-sized shafts, chrome plating quality bars, and boat shafts. Architectural design, naval equipment, oil/gas pipelines, and automobile components are just a few examples of popular applications.
The corrosion resistance of stainless steel rods and bars is one of its most valuable properties. These rods are available in a variety of shapes and formats on the market, including round, flat, square, and hexagonal bars.
Stainless Steel Piston Rod Quality:
| Grades used in Stainless steel piston rod | 303, 304L, 310S, 316L, 316Ti, 321, 403, 410, 416, 420, 420B, 420C, 430F, 431, 17-4ph, Duplex F51 (2205) 1.4305, 1.4307, 1.485, 1.404, 1.4571, 1.4541, 1.4006, 1.4005, 1.4021, 14028, 1.4034, 1.4104, 1.4057, 1.4542, 1.4462 |
| Straightness | A484; f6, f7, h7, f8, h8, h9, ½ etc. |
| Size Tolerances | A484; f6, f7, h7, f8, h8, h9, ½ etc. |
| Length | From 1 meter up to 6 meters. |
| Heat Treatment | Hardened & Tempered (HT), Annealed, Quenched & Tempered (QT), and Solution Annealed, etc. |
Characteristics of Stainless Steel Piston Rod:
Hard Chrome:
Piston rods are made of hardened steel with metal spray in the packing sections to prolong rod life. Steel, cast nodular iron, or aluminum any of those can be used to make pistons. Cast iron is the most common because of its durability.
Plating Thickness:
Piston Rods are coated to a thickness of 23-30 microns.
The piston rod and piston are the major pieces of a hydraulic cylinder that move on a regular basis. The constant back and forth action causes significant wear and tear on the rod.
Corrosion Resistance:
Stainless steel piston rod stands for a refined structure of stainless steel
that guarantees high quality and corrosion resistance. These rods are made with top-of-the-line factor inputs and cutting-edge technology.
Conclusion:
As stainless steel piston rods can be modified into various sizes and grades with accuracy and precision making them useful for many industries.
Vishwa Stainless Pvt. Ltd is one of the best manufacturers and exporters of Stainless Steel Piston Rod Bars on the PAN India Level with promising quality and precision that meets the requirements of multiple applicants.
To acknowledge more about Stainless steel piston rod bars you can contact us or reach us here: www.vishwastainless.com/stainless-steel-piston-rod/
